×
Уведомление о праздновании Национального дня Тайваня
Наш офис будет закрыт 9 октября 2026 в связи с национальным праздником. Мы вернемся к работе 12 октября согласно рабочему графику. Приносим извинения за неудобства.
Automatic steel wire coil compacting and strapping equipment, horizontal type AW-230-4W
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 14000 × 2560 × 3400 |
| Coil dimensions | mm | Max. outer diameter: 1400 Inner diameter: 850 (±100) |
| Number of strappings | pcs. | 4 |
| Compressed air supply | MPa | 0.4 ~ 0.6 |
| Strapping position | — | Equally spaced along the circumference |
| Coil length after compacting | mm | 625 ~ 2400 |
| Strapping cycle time | s | ≤ 32 |
| Maximum power consumption | kW | 100 ~ 150 |
| Tie wire diameter | mm | Ø 6.3 ~ 8.0 |
| Tie wire material | — | Q195–Q235 steel |
| Twist type | — | Twist knot |
| Compacting force | t | 10 ~ 50 |
Automated wire rod coil pressing and banding system, horizontal configuration with interchangeable head AW-230-4C
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 14000 × 2560 × 3400 |
| Coil dimensions | mm | Max. outer diameter: 1400 Inner diameter: 850 (±100) |
| Number of strappings | pcs. | 4 |
| Compressed air supply | MPa | 0.4 ~ 0.6 |
| Strapping position | — | Equally spaced along the circumference |
| Coil length after compacting | mm | 650 ~ 2400 |
| Strapping cycle time | s | ≤ 35 |
| Maximum power consumption | kW | 100 ~ 150 |
| Strap size | mm | 31.75 × 0.8 ~ 0.9 |
| Tie wire diameter | mm | Ø 6.3 ~ 8.0 |
| Strap material | — | Cold rolled steel strap |
| Tie wire material | — | Q195–Q235 steel |
| Seal type (for steel strap) | — | Sealless joint (die-cut notched) |
| Twist type (for wire) | — | Twist knot |
| Compacting force | t | 10 ~ 50 |
Automated wire rod coil compression and plastic banding equipment, horizontal configuration AW-230-4P
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 13730 × 2560 × 3070 |
| Coil dimensions | mm | Outer diameter: 1400 Inner diameter: 850 |
| Number of strappings | pcs. | 4 |
| Hydraulic system fluid pressure | MPa | 16 |
| Strapping position | — | Equally spaced along the circumference |
| Coil length after compacting | mm | 625 ~ 2400 |
| Strapping cycle time | s | ≤ 35 |
| Power supply | — | 380 V, 50 Hz |
| Strap size | mm | 25 / 32 × 0.8 ~ 1.35 |
| Strap material | — | Polyester strap (PET) |
| Seal type | — | Friction weld joint |
| Compacting force | t | 10 ~ 50 |
Automated wire rod coil compression and strapping machine, vertical configuration AN-350-4W
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 9900 × 9867 × 8042 |
| Coil dimensions | mm | Outer diameter: 1250 Inner diameter: 850 |
| Number of strappings | pcs. | 4 |
| Hydraulic system fluid pressure | MPa | 16 |
| Strapping position | — | Equally spaced along the circumference |
| Coil length after compacting | mm | 550 ~ 3700 |
| Strapping cycle time | s | ≤ 35 |
| Power supply | — | 380 V, 50 Hz |
| Tie wire diameter | mm | Ø 6.3 ~ 8.0 |
| Tie wire material | — | Q195–Q235 steel |
| Twist type | — | Twist knot |
| Compacting force | kN | 60 ~ 400 |
Automated strapping equipment for long steel products AL-400-A
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 4424 × 1888 × 1100 |
| Guide track inner diameter | mm | ≈ ⌀ 700 |
| Tie wire diameter | mm | Ø 6.3 ~ 7.0 |
| Cooling type | — | Air cooling |
| Control voltage | — | 24 V DC |
| Tie wire material | — | Q195–Q235 steel |
| Hydraulic pump flow rate | l/min | 100 |
| Strapping cycle time | s | ≤ 14 |
| Permissible bundle diameter | mm | Ø 150 ~ 450 |
| Hydraulic system operating pressure | bar | ≈ 100 ~ 120 |
| Electric motor power | kW | 11 |
| Maximum tension force | N | 10000 |
Automated steel profile and structural section bundling equipment AL-400-B
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 4798 × 3352 × 1256 |
| Permissible stack width | mm | 150–550 |
| Number of strappings per cycle | pcs. | 1 |
| Compressed air supply | MPa | 0.5 ~ 0.7 |
| Strapping position | — | Top |
| Permissible stack height | mm | 150 ~ 600 |
| Strapping cycle time | s | ≤ 30 |
| Power supply | — | 380 V, 50 Hz |
| Strap size | mm | 31.75 × 0.7 ~ 1.1 |
| Strap material | — | Cold rolled steel strap |
| Seal type | mm | Figure-of-eight seal (with clip), 50 × 32 |
| Strap tension force | kN | 4 ~ 20 |
Automated strapping equipment for structural steel sections and profiles AL-400-C
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 4883 × 1583 × 2834 |
| Decoiler overall dimensions (L × W × H) | mm | 3519 × 1300 × 3964 |
| Number of strappings per cycle | pcs. | 1 ~ 2 |
| Hydraulic system fluid pressure | MPa | 14 |
| Strapping position | — | Top |
| Bundle stack dimensions | mm | From 150 × 150 to 650 × 650 |
| Strapping cycle time | s | ≤ 15 (double strapping) |
| Power supply | — | 380 V, 50 Hz |
| Tie wire diameter | mm | Ø 6.3 ~ 8.0 |
| Tie wire material | — | Q195–Q235 steel |
| Twist type | — | Twist knot |
| Wire tension force | kN | ~ 10 |
Automated steel coil strapping equipment for radial and circumferential applications ACS-20-S
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 7145 × 3496 × 1000 |
| Permissible coil width | mm | 550 ~ 2000 |
| Number of strappings per cycle | pcs. | 1 ~ 5 |
| Compressed air supply | MPa | 0.5 ~ 0.7 |
| Strapping position | — | Side (side strapping head) |
| Permissible coil outer diameter | mm | Ø 900 ~ 2250 |
| Strapping cycle time | s | ≤ 35 |
| Power supply | — | 380 V, 50 Hz |
| Strap size | mm | 31.75 × 0.7 ~ 1.1 |
| Strap material | — | Cold rolled steel strap |
| Seal type | mm | Figure-of-eight seal (with clip), 50 × 32 |
| Strap tension force | kN | 4 ~ 20 |
Robotic equipment for automated identification tag welding on long steel products AS-1000-R
Technical specification
| Parameter | Unit | Value |
|---|---|---|
| Overall dimensions (L × W × H) | mm | 2510 × 2210 × 2227 |
| Product diameter | mm | 10 ~ 40 |
| Number of welded tags | pcs. | 1 ~ 2 |
| Compressed air supply | MPa | 0.4 ~ 0.6 |
| Tag welding location | — | End face (front surface) |
| Bundle outer diameter | mm | Ø 200 ~ 500 |
| Welding cycle time | s | 1 tag: < 20 2 tags: < 30 |
| Power supply | — | 380 V, 50 Hz |
| Welding stud type | — | See stud drawing |
| Welding stud material | — | Carbon steel |
| Welding method | — | Capacitor discharge welding (CD welding) |
| Product length | m | 9 / 12 |
