FIRST ARTICLE OPTICAL SORTING EQUIPMENT WITH 360 DEGREE ROTATION

return to main page

 

EQUIPMENT FOR TESTING FASTENERS AT ANGLES AND WITH 360 DEGREES ROTATION

 

Using servo motors and magnetic platform to focus the camera. A stepper motor rotates the product under test at different angles and 360 degrees. The data is stored in the computer and can be converted to EXCEL format for further statistical report.

 

RQA-2500 SERIES

1

 

  • Suitable products to verify both different categories (size in the range of 100 * 100 mm).
  • Ideal for flat objects, such as nuts, gaskets, O-rings, etc.
  • Easy to place, there is no need of alignment.
  • Automatic control, without setting up the necessary stages.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

     

 

Parameters to be checked:

The length of the screws The width of the head Auto focus Centre Outside diameter
Inner diameter Radius Radian The angle of the thread Concentric and circle

 

Specifications:

  • Options of fasteners max. size 90 * 90 * 15 mm
  • Accuracy inspection: ± 10 microns
  • Accuracy at re-inspection: ± 5 microns
  • Inspection time: 60 sec / cycle
  • Machine weight net / gross: 400/531 kg
  • Dimensions equipment 1200/700/1580
  • Dimensions after setting: 1410/895/1850

 

 

RQB-1500 SERIES

2

 

     

  • Suitable for inspection of fasteners and lifting tackle (screws, rivets).
  • High speed and efficiency of check (10 units / session inspection).
  • Advanced telecentric lens are equipped with a parallel illumination that helps to avoid visual defects.
  • Automatic control, without setting up the necessary stages.
  • Optical and magnetic method is suitable for high-precision positioning.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

     

 

Parameters to be checked:

The height of the head The width of the head The angle of the cylindrical head with a rounded end The width of the washers The height of the washers
Radius The outer diameter of the thread The inner diameter of the thread The size of the thread pitch The angle of the thread
The effective diameter of the thread Shank diameter The length of the shank total length The angle of the tip

 

Specifications:

  • Accuracy test: ± 10 microns
  • Accuracy at re-inspection: ± 10 microns
  • Speed test: 15 ~ 150 sec / unit
  • Machine weight net / gross: 450/620 kg
  • Dimensions equipment : 1550/750/1680
  • Dimensions of the machine after the installation: 1740/950/2060

 

Application area:

  • The height of the head: 3 ~ 12 mm
  • The diameter of the head: 5 ~ 24 mm
  • The length of the screws (with head): 10 ~ 135 mm
  • outer screw diameter: 3 ~ 16 mm

 

 

 

RQC-1500 SERIES

3

 

     

  • Suitable fasteners for general and special forms of fasteners.
  • The ability to quickly test at 360 ° rotation of the tested products.
  • Advanced telecentric lens is equipped with a parallel illumination helps avoid visual defects.
  • Automatic control, without setting up the necessary stages.
  • Optical and magnetic method is suitable for high-precision positioning.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.

     

 

Parameters to be checked:

Parallel faces Parallel angles The width of the head The height of the head The angle of the cylindrical head with a rounded end
Width / Height of washers The length of the shank Radius The outer / inner diameter of the thread The angle of the tip
The size of the thread pitch The angle of the thread The effective diameter of the thread Shank diameter total length

 

Specifications:

  • Accuracy test: ± 10 microns
  • Accuracy at re-inspection: ± 5 microns
  • Inspection speed: 30 ~ 300 sec / unit
  • Equipment weight net / gross: 300/430 kg
  • Dimensions equipment : 1000/720/1730
  • Dimensions of the machine after the installation: 1200/920/2060

Application area:

  • The height of the head: 3 ~ 12 mm
  • The diameter of the head: 5 ~ 25 mm
  • The length of the screws (with the length of the head): 10 ~ 135 mm
  • outer screw diameter: 3 ~ 18 mm