AUTOMATIC ASSEMBLY EQUIPMENT FOR FASTENERS, METALWARE AND PARTS

return to main page equipment for automatic assembly

 

NUT, NYLON RING AND WASHER ASSEMBLY EQUIPMENT

MACHINE FOR ASSEMBLY LOCK NUTS AND NYLON RINGS

Highlights:

  • Compact design.
  • Low cost.
  • Automatic coolant.
  • Easy to operate and maintain.
  • The high quality of the finished product.
  • Automatic products feed by vibratory feeder.
  • In the absence of production in the bunker, the machine stops automatically.
retaining nuts

Specifications

Model SNA 11B SNA 14B SNA 19B SNA 24B SNA 30B
The allowable size of nuts turnkey , mm 8.2-11.3 (M6) 11.3-14.3 (M8) 14.3-19 (M12) 19-24 (M16) 24-30 (M20)
Max. nut thickness , mm 8.5 12 16 19.5 24
Engine, PM 2 2 3 3 5
Max. perform., pcs./ Min. 250 200 160 145 130
Net weight, kg 830 1000 1250 1480 1960
Gross Weight, kg 1000 1200 1500 1750 2250
Machine dimensions (LxWxH), mm 1180x1000x1520 1300x1230x1550 1340x1300x1560 1430x1350x1560 1600x1550x1760
Additionally
Inverter Motor + + + + +
Device for troubleshooting + + + + +
Programmable Logic Controller + + + + +
Automatic grading of defective products + + + + +
The device for feeding inspection + + + + +

 

MACHINE FOR ASSEMBLY LOCK NUTS AND NYLON RINGS

 

This machine is widely used in various industries. Unlike traditional assembly machine that is used to assembly nylon rings and nuts, this machine is used in all assembly processes by changing specially designed mold. For the control of the assembly process in the HNP machine programmable logic controller is used. The sensor and the frequency of converter responsible for the management and control of material feed rate of the press. In the event of any emergency, the machine automatically stops. The design of the machine makes it easy to control the depth of the press. The function of non-stop operation provides high efficiency operation and increases productivity.

MACHINE FOR ASSEMBLY LOCK NUTS AND NYLON RINGS

 

Highlights:

  • This equipment is able to collect the nylon washers and nuts.
  • The operating mode is controlled by programmable controllers.
  • The speed is controlled by inverter.
  • In the case of malfunction the equipment stops automatically.
  • The design of the equipment makes it easy to replace tools.
  • Ideal for serial production of fasteners.
  • Suitable for locking nuts.
nylon rings, rings and nutsDIN 980、982、985、6924、6925、6926、6927

Specifications:

Model HNP-13 HNP-19 HNP-27 HNP-36
size of the nut M5~M8 10"~5/16" M10~M14 3/8"~5/8" M16~M20 5/8"~3/4" M22~M30 7/8”~1¼”
Press weight, tons 8 10 15 20
Max. Performance, pcs. / Min. 300 250 120 90
Power consumption from the network, kW 1.5 2.2 2.2 (1:5S) 3.7 (1:5S)
Max. energy consumption, kW/h 4.6 5.3 6.8 8.6
Vibrator, mm Ø400 & Ø450 Ø400 & Ø550 Ø500 & Ø650 Ø720 & Ø850
Oil tank, L 22 23 25 25
Dimensions of the machine , WxLxH/m 1.5x1.8x1.65 1.53x2.11x1.75 2.1x2.5x1.9 2.6x3.5x2.1
Net weight, kg 1070 1300 2200 3100