COILING AND FORMING EQUIPMENT FOR SPRINGS, RINGS AND SPECIAL FASTENERS

return to main page

 

EQUIPMENT FOR SPRING PRODUCTION

SPRING COILING EQUIPMENT

 

Nc-machining technique is equipped with a number 3, 4, 6, which allows easily produce compression springs, coil springs in two or three successive steps. Changing the parameters of the equipment, such as changing the diameter of manufactured products can be carried out using the control panel interface. The length and speed of the wire feed is controlled and regulated by a computer program. The equipment stops automatically when the failure or absence of wire.

NC-MACHINING TECHNIQUE FOR COMPRESSION AND COIL SPRINGS PRODUCTION

 

SPECIFICATIONS

Model RG-208-CNC RG-212-CNC RG-230-CNC RG-238-CNC RG-265-CNC RG-280-CNC
Wire diameter 0.13-0.8 mm 0.3-1.2 mm 0.8-3.0 mm 1.6-3.8 mm 2.6-6.5 mm 3.0-8.0 mm
Max. Wire feed speed 90 m / min. 90 m / min. 110 m / min. 110 m / min. 70 m / min. 70 m / min.
Max. Wire length no restrictions no restrictions no restrictions no restrictions no restrictions no restrictions
Max. Spring outer diameter (min. ext. diameter spring wire diameter must exceed three times) 20 mm 20 mm 50 mm 60 mm 100 mm 100 mm
Performance 600 pcs / min. 500 pcs / min. 145 pcs / min. 120 pcs / min. 60 pcs / min. 60 pcs / min.
Winding direction right / left right / left right / left right / left right / left right / left
Power 1.75 kW 2.75 kW 6.5 kW 8.4 kW 16.5 kW 22.5 kW
Hydraulic Press - - - - - 3 hp
Engine power for the coolant - - - - - 1/4 hp
Model unwinding device for wire RG-70E RG-70E RG-600E RG-1000E RG-1500E RG-1500E
Dimensions of equipment 72х101х138 cm 72х108х138 cm 140х136х170 cm 203х130х200 cm 164х228х212 cm 164х228х212 cm
Weight of equipment 340 kg 395 kg 1350 kg 1660 kg 3600 kg 3580 kg
Dimensions of equipment in packaging 85х146х156 cm 85х140х156 cm 155х150х91 cm 218х145х224 cm 245х182х242 cm 245х182х242 cm
Weight of Equipment in Packaging 550 kg 605 kg 1600 kg 2010 kg 4080 kg 4060 kg

 

 

NC-MACHINING TECHNIQUE FOR COMPRESSION AND COIL SPRINGS PRODUCTION

 

NC-MACHINING TECHNIQUE FOR COMPRESSION AND COIL SPRINGS PRODUCTION

 

Hardware Specifications

Model RG-2120-CNC RG-412-CNC RG-430-CNC RG-438-CNC RG-465-CNC RG-480-CNC RG-4120-CNC
Wire diameter 5.0-12.0 mm 0.3-1.2 mm 0.8-3.0 mm 1.6-3.8 mm 2.6-6.5 mm 3.0-8.0 mm 5-12 mm
Max. Wire feed speed 60 m / min. 90 m / min. 110 m / min. 110 m / min. 70 m / min. 70 m / min. 60 m / min.
Max. Wire length no restrictions no restrictions no restrictions no restrictions no restrictions no restrictions no restrictions
Max. Spring outer diameter (min. ext. diameter spring wire diameter must exceed three times) 150 mm 20 mm 50 mm 60 mm 100 mm 100 mm 150 mm
Performance 35 pcs / min. 500 pcs / min. 120 pcs / min. 120 pcs / min. 50 pcs / min. 50 pcs / min. 40 pcs / min.
Winding direction right / left right / left right / left right / left right / left right / left right / left
Power 37 kW 3.9 kW 8.25 kW 10.7 kW 19.7 kW 26.9 kW 45.5 kW
Hydraulic Press 5 hp - - - - 3 hp 5 hp
Engine power for the coolant 1/4 hp - - - - 1/4 hp 1.4 hp
Model unwinding device for wire RG-1500E RG-70E RG-70E RG-1000E RG-1500E RG-1500E RG-1500E
Dimensions of equipment 343х215х245 cm 72х108х138 cm 140х136х170 cm 203х130х200 cm 164х228х212 cm 164х228х212 cm 343х215х245 cm
Weight of equipment 12400 kg 425 kg 1480 kg 1700 kg 3655 kg 3670 kg 12800 kg
Dimensions of equipment in packaging 376х233х273 cm 85х140х156 cm 155х150х91 cm 218х145х224 cm 245х182х242 cm 245х182х242 cm 376х233х273 cm
Weight of Equipment in Packaging 13400 kg 635 kg 1710 kg 2050 kg 4135 kg 4150 kg 13800 kg

 

 

EQUIPMENT FOR SPRING PRODUCTION

EQUIPMENT FOR COMPRESSION AND COIL SPRINGS PRODUCTION

 

The equipment is suitable for the production of various types of springs: for machinery, equipment, toys, appliances, furniture, stationery, pens, umbrellas, motorcycles, bicycles, tools and so on.

Source material: spring wire, wire for fortepiano, stainless steel wire, steel wire, galvanized wire, copper wire, etc.

 

EQUIPMENT FOR PRODUCTION OF CYLINDRICAL SPIRAL SPRING

 

SPECIFICATIONS

Model RG-08 RG-15 RG-45
Wire diameter 0.13-0.8 mm 0.3-1.6 mm 2.0-4.5 mm
Wire length

Ø0.13-0.5 mm= 1080 mm

Ø0.6-0.8 mm= 500 mm

Ø1.1-1.6 mm= 860 mm

Ø0.7-1.0 mm= 1515 mm

Ø0.3-0.6 mm= 2600 mm

Ø4.5-Ø470 mm

Ø4.0-Ø950 mm

Ø3.0-Ø1680 mm

Ø2.3-Ø3200 mm

Max. Spring outer diameter (min. ext. diameter spring wire diameter must exceed three times) 20 mm 30 mm (30 mm (for the wire Ø1.1-1.6 mm inner diameter of the spring should six times exceed the wire diameter) 55 mm
Performance 45-230 pcs / min.

60 Hz: 28,52,82,118, 4 steps

50 Hz: 23,43,68,98, 4 steps

60 Hz: 4,6,10,14,19,30,48,69

50 Hz: 3,5,8,12,16,25,40,58

Winding direction clockwise/counter-clockwise clockwise/counter-clockwise clockwise/counter-clockwise
Basic engine 1 hp 1 hp 5 hp, 1/4 hp, 3 phase
Model unwinding device for wire RG-70E SY-6 SY-6
Dimensions of equipment 70х70х167 cm 77х92х135 cm 150х142х172 cm
Weight of equipment 355 kg 570 kg 2000 kg
Dimensions of equipment in packaging 86х165х191 cm 161х92х162 cm 164х155х206 cm
Weight of Equipment in Packaging 480 kg 680 kg 2300 kg

 

 

EQUIPMENT FOR SPRING PRODUCTION

EQUIPMENT COMPRESSION SPRINGS PRODUCTION

EQUIPMENT COMPRESSION SPRINGS PRODUCTION COMPRESSION SPRING

 

SPECIFICATIONS

Model RG-1350-G RG-2870-G
Wire diameter Ø1.0-Ø3.0 Ø2-Ø8 mm
Spring length 10-150 mm 18-300 mm
Spring outer diameter Ø6-Ø50 mm Ø10-Ø70 mm
Engine power 5 hp х2, 1 hp х1 5 hp х4, 1 hp х1
The size of the grinding mechanism 400 mm х2 pcs. 400 mm х4 pcs.
Dimensions of equipment 150х102х210 cm 180х142х230 cm
Dimensions of equipment in packaging 168х117х220 cm 198х157х226 cm
Weight of equipment 2000 kg 3150 kg
Weight of Equipment in Packaging 2300 kg 3550 kg

 

 

EQUIPMENT FOR SPRING PRODUCTION

EQUIPMENT FOR ROTATIONAL AND TORSIONAL SPRINGS PRODUCTION

 

EQUIPMENT FOR ROTATIONAL AND TORSIONAL SPRINGS PRODUCTION Tortile, torsional springs

 

Equipment for rotational and torsional springs production is able to manufacture:

  • Springs of small dimensions and low clamping force for name cards clips, hairpins, clips for clothing, electronics.
  • Springs with increased clamping force for hair pins, clothing, office supplies, furniture, tools, scissors and so on. Springs manufactured on this equipment have long hooks at both ends for engaging and fixing. Hooks are formed by bending tool manually. Number of turns of the spring can reach 25.
  • Springs of larger diameter wire: Ø1.6-Ø2.5 mm (40 turns of wire) or Ø2.6-Ø4.0 mm (25 turns of wire).

 

SPECIFICATIONS

 

Model RG-11K RG-18K RG-41K
Wire diameter 0.3-1.2 mm 1.2-2.2 mm 2.3-4.5 mm
Spring outer diameter 42 mm 65 mm 120 mm
The number of coils

Ø0.3-Ø0.7=0.5-28 pcs.

Ø0.8-Ø1.2=0.5-13 pcs.

Ø1.2-Ø1.6=28 pcs.

Ø1.7-Ø2.2=13 pcs.

Ø2.3-Ø3.0=28 pcs.

Ø3.1-Ø3.8=18 pcs.

Ø3.9-Ø4.5=8 pcs.

Shoulder length 40 mm*50 mm 50 mm*70 mm 70 mm*100 mm
Winding direction clockwise/counter-clockwise clockwise/counter-clockwise clockwise/counter-clockwise
Performance

60 Hz: 30,54,84,120

50 Hz: 24,44,69,99

60 Hz: 19,32,50,79

50 Hz: 15,26,41,65

60 Hz: 2,4,6,9,10,16,26,36

50 Hz: 1,6,3.3,5,7.5,8.3,13,22,30

Basic engine 1/2 hp 1 hp 3 hp
Dimensions of equipment 98х63х103 cm 115х86х113 cm 166х143х155 cm
Dimensions of equipment in packaging 120х86х145 cm 122х92х153 cm 205х165х194 cm
Weight of equipment 240 kg 350 kg 920 kg
Weight of Equipment in Packaging 400 kg 500 kg 1250 kg

 

 

EQUIPMENT FOR SPRING PRODUCTION

EQUIPMENT FOR DOOR SPRINGS PRODUCTION

EQUIPMENT FOR DOOR SPRINGS PRODUCTION Door spring

 

SPECIFICATIONS

Model RG-58-RDS
Wire diameter Ø5-Ø8 mm
Spring length 100-800 mm
Spring outer diameter 60-120 mm
Winding direction clockwise/counter-clockwise
Engine machine 5 hp х 2
Hydraulic Press 5 hp х 2
Dimensions of equipment machine 135х95х195 cm
Hydraulic Press 130х27х130 cm
secondary treatment table 170х65х82 cm
Dimensions of equipment in packaging machine 151х125х220 cm
Hydraulic Press 102х122х99 cm
secondary treatment table 185х80х120 cm
Weight of equipment machine 1710 kg
Hydraulic Press 220 kg
secondary treatment table 170 kg
Weight of Equipment in Packaging machine 2010 kg
Hydraulic Press 350 kg
secondary treatment table 610 kg

 

 

EQUIPMENT FOR SPRING PRODUCTION

EQUIPMENT FOR OIL AND SLIPPER SEALS SPRINGS PRODUCTION

EQUIPMENT FOR SPRING PRODUCTION FOR SLIPPER SEALS Spring for slipper seals

 

SPECIFICATIONS

Model RG-206-CNC
Wire diameter Ø0.2-Ø0.6 mm
Spring length 20-280 mm
Performance 40 pcs/ min.
Power 1.75 kW
Wire unwinder model RG-70E
Dimensions of equipment 72х95х138 cm
Dimensions of equipment in packaging 134х77х170 cm
Weight of equipment 280 kg
Weight of Equipment in Packaging 560 kg