WIRE/ROD CALIBRATION EQUIPMENT AND LINES

 

 

POLISHING EQUIPMENT

Blank feeding mechanism Straightening equipment Equipment for metal dephosphorization Drawing machines Catheter Polishing machine Unloader
Blank feeding mechanism Straightening equipment Equipment for metal dephosphorization Drawing machines Catheter Polishing machine Unloader

 

POLISHING EQUIPMENT

POLISHING EQUIPMENT

Polishing and rectifying machine is equipped with two pairs of polishing discs and 5-7 rectyifying rollers, which ensure the process of products straightening and polishing simultaneously. Lubrication fluid continuously circulates in the system during operation of the machine, that provides the best degree of polishing discs, straightening rolls and rods lubrication.

 

 

Polishing machine for round steel and tube

Polishing equipment is used to remove rust from the surface of round bars, rods and tubes.Two brushes are installed at the beginning and end of the machine to achieve the highest quality polishing.

 

 

POLISHING EQUIPMENT

Round metal rectified by passing through pre-programmed tungsten ring by rotation. The advantage consists in achieving the absolute straightness of the blank surface. Subsequently, in processing of the voltage of the rod is removed, thus the product gets the required quality parameters.

 

 

 

 

EQUIPMENT FOR SHAFTS RECTIFYING

MACHINE FOR SHAFTS RECTIFYING

Application:   

Equipment for shafts rectifying is applied in the automotive industry for the straighthening shafts of gears, engines, camshafts, steering rods, spindles, synchronizing rings, as well as the shifter forks.

 

*The mechanism of the automatic transmission is purchased separatelyl.

 

 

EQUIPMENT FOR TESTING PRODUCTS BENDING RADIUS

1

Equipment for testing the bending radius of products are used for testing round metal, hexagonal and tetrahedral rods in length from 2 to 6 meters. Special measuring instrument determines the degree of straightness of reinforcing rods.