COLD FORMING EQUIPMENT FOR SELF-TAPPERS AND SCREWS

return to main page equipment for hot forging equipment for cold heading

 

COLD FORMING EQUIPMENT FOR SELF-TAPPERS AND SCREWS

SELF-TAPPERS PRODUCTION

Galvanic line. Taiwan
  • ASSEMBLY SHOP OF THE EQUIPMENT
  • E-CATALOG
  • QUALITY CONTROL OF MANUFACTURER
  • Equipment for self-tapper heading

    Galvanic line. TaiwanVideo of the equipment for the production of screws

     

    EQUIPMENT FOR HEADING (PRODUCTION) OF SELF-TAPPERS AND SCREWS IN A PROTECTIVE CASING

    Thanks to a completely sealed construction, the model of the equipment for the production of screws and bolts are of low noise and high environmental performance, respectively, are more expensive than other models. Models with protective casing combines advanced features with a complex system of control parameters.

    Hardware products manufactured on the equipment used worldwide in many companies, electronics manufacturers such as SONY, PANASONIC, OLYMPUS, SAMSUNG, BenQ, and others.

     
    PRODUCTION

    EQUIPMENT FOR COLD HEADING (PRODUCTION) SELF-TAPPERS AND SCREWS IN A PROTECTIVE CASING

    SPECIFICATION OF EQUIPMENT FOR SELF-TAPPERS PERDUCTION

    1 One (1) piece of equipment includes:

    • One (1) set tool
    • Unwinder of wire (tools for heading)
    • Working lighting
    • Tools for technical service
    • Passport
    • Instruction manual in Russian
    • Wiring diagrams

    Additional equipment (optional):

    • Inverter speed
    • The conveyor for chip removal
    • Certification СЕ
    EQUIPMENT FOR COLD HEADING
    EQUIPMENT FOR COLD HEADING (PRODUCTION) SELF-TAPPERS AND SCREWS IN A PROTECTIVE CASING EQUIPMENT FOR COLD HEADING

     

    Equipment for the production of self-tappers and bolts Model RG-2C  
    FA-2C Max. blank diameter 0.8-3 mm
    Max.blank length 24 mm
    The stroke length of the slide 38 mm
    Performance 190-220 pcs./min.
    The diameter of the core matrix 20 mm
    The diameter of the cutting matrix 13.5 mm
    Punch of the 1st position 18 mm
    Punch of the 2-position
    18 mm
    Power of main engine
    1 hp
    Oil pump
    ¼ hp
    Overall dimensions, LхWхH
    1650x1100x1560 сm
    Net weight
    860 kg
    Gross Weight

    930 kg

    Equipment for the production of self-tappers and bolts
    Other models

    FA-5.5C FA-10C FA-15C FA-20C FA-25C
    RG-5.5C RG-10C RG-15C RG-20C RG-25C

     

    Equipment for the production of self-tappers and bolts
    SPECIFICATIONS

    Model Max. blank diameter Max.blank length The stroke length of the slide Air capacity, pcs. / Min. Diameter of the core matrix Diameter of the parting matrix The first punch The second punch Power of main engine Oil pump Options,
    LхWхH, сm
    Net weight, kg Gross Weight , kg
    RG-2C 0.8~3 mm 24 mm 38 mm 190~220 20 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 165x110x156 860 930
    RG-5.5C 2~3.5 mm 28 mm 46 mm 200~250 25 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 175x115x185 980 1050
    RG-10C 2~4 mm 32 mm 58 mm 190~220 30 mm 15 mm 24 mm 20 mm 2 LS ¼ LS 185x130x200 1060 1360
    RG-15C 4~5 mm 64 mm 92 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 198x130x175 1930 2130
    RG-15C 4~5 mm 76 mm 110 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 198x130x175 2030 2230
    RG-20C 4~6 mm 76 mm 124 mm 80~100 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 240x140x150 2775 2280
    RG-20C 4~6 mm 102 mm 160 mm 80~100 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 265x140x188 3250 3400
    RG-25C 4~8 mm 102 mm 160 mm 65~85 60 mm 32 mm 38 mm 38 mm 7 ½ LS ¼ LS 350x160x180 4500 4650

     

    EQUIPMENT FOR HEADING (PRODUCTION) OF SELF-TAPPERS AND SCREWS IN A SEMI-PROTECTIVE CASING

    Models of equipment for the production of screws with semi-protection casing is relatively easier to operate compared to models in a protective casing, and more environmentally friendly. Currently, this equipment is the most popular choice among our clients. Cold forging equipment for the semi-protective casing are represented by machines of large and medium size, ideal for the production of high-quality large and microscopic screws used in machinery, automotive, photo-electronics, precision electronics (iPhone), electrical engineering, automotive industry and others. Fasteners of this equipment can withstand shock and vibration.

     

    EQUIPMENT FOR COLD HEADING (PRODUCTION) OF SELF-TAPPERS AND SCREWS IN A SEMI-PROTECTIVE CASING

    Equipment Specification

    Equipment for the production of self-tappers and bolts Model RG-5S  
    FA-5S Max. blank diameter 0.8-3 mm
    Max.blank length 24 mm
    The stroke length of the slide 38 mm
    Performance 170-200 pcs./min.
    The diameter of the core matrix 20 mm
    The diameter of the cutting matrix 13.5 mm
    Punch of the 1st position 18 mm
    Punch of the 2-position
    18 mm
    Power of main engine
    1 hp
    Oil pump
    ¼ hp
    Overall dimensions, LхWхH
    1650x1100x1560 сm
    Net weight
    820 kg
    Gross Weight

    880 kg

    Equipment for the production of self-tappers and bolts
    Other models

    FA-5S FA-10S FA-15S FA-20S
    RG-5.5S RG-10S RG-15S RG-20S

     

    Equipment for the production of self-tappers and bolts
    SPECIFICATIONS

    Model Max.blank diameter Max.blank length The stroke length of the slide Performance,
    pcs./min.
    Diameter of the core matrix Diameter of the parting matrix The first punch The second punch Drive power Oil pump Options
    LxWxH, mm
    Net weight, kg Gross weight, kg
    RG-5S 0.8-3 mm 24 mm 38 mm 170~200 20 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1650x1100x1560 820 880
    RG-5.5S 2-3.5 mm 28 mm 46 mm 200~250 25 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1750x1150x1550 980 1050
    RG-10S 2-4 mm 32 mm 58 mm 190~220 30 mm 15 mm 24 mm 20 mm 2 LS ¼ LS 1850x1300x1720 1050 1160
    RG-15S 4-5 mm 64 mm 92 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 2100x1100x1320 1750 1840
    RG-15S 4-5 mm 76 mm 110 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 2100x1100x1320 1860 1980
    RG-20S 4-6 mm 76 mm 124 mm 90~110 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 2400x1400x1500 2645 2750
    RG-20S 4-6 mm 102 mm 156 mm 80~100 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 2650x1500x1500 3210 3360

     

    EQUIPMENT FOR COLD HEADING (PRODUCTION) OF SELF-TAPPERS AND SCREWS IN A SEMI-PROTECTIVE CASING

    Equipment Specification

     

    FA-5 Model RG-5  
    Max. blank diameter 0.8-3 mm
    Max.blank length 24 mm
    The stroke length of the slide 38 mm
    Performance 170-200 pcs./min.
    The diameter of the core matrix 20 mm
    The diameter of the cutting matrix 13.5 mm
    Punch of the 1st position 18 mm
    Punch of the 2-position
    18 mm
    Power of main engine
    1 hp
    Oil pump
    ¼ hp
    Overall dimensions, LхWхH
    1370x840x1020 сm
    Net weight
    500 kg
    Gross Weight

    560 kg

    Equipment for the production of self-tappers and bolts
    Other models

    FA-5.5 FA-10 FA-15 FA-20
    RG-5.5 RG-10 RG-15 RG-20

     

    Equipment for the production of self-tappers and bolts
    SPECIFICATIONS

    Model Max.blank diameter Max.blank length The stroke length of the slide Performance,
    pcs./min.
    Diameter of the core matrix Diameter of the parting matrix The first punch The second punch Drive power Oil pump Options
    LxWxH, mm
    Net weight, kg Gross weight, kg
    RG-5 0.8-3 mm 24 mm 38 mm 170~200 20 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1370x840x1020 500 560
    RG-5.5 2-3.5 mm 28 mm 46 mm 200~250 25 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1750x1100x1600 780 860
    RG-10 2-4 mm 32 mm 58 mm 190~220 30 mm 15 mm 24 mm 20 mm 2 LS ¼ LS 1690x1090x1260 960 1060
    RG-15 4-5 mm 64 mm 92 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 2100x1100x1320 1640 1750
    RG-15 4-5 mm 76 mm 110 mm 150~180 34.5 mm 19 mm 31 mm 31 mm 2 LS ¼ LS 2100x1100x1320 1750 1860
    RG-20 4-6 mm 76 mm 124 mm 90~110 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 2400x1400x1500 2400 2500
    RG-20 4-6 mm 102 mm 156 mm 90~110 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 2400x1400x1500 2400 2500
    RG-25 4-8 mm 102 mm 160 mm 65~85 60 mm 32 mm 38 mm 38 mm 7 ½ LS ¼ LS 3500x1510x1350 4000 4150
    RG-30 10 mm 152 mm 230 mm 52~60 80 mm 40 mm 55 mm 55 mm 15 LS ½ LS 4450x1740x1510 7000 7000
    RG-40 13 mm 152 mm 230 mm 50~60 98 mm 48 mm 68 mm 68 mm 30 LS ½ LS 5000x2050x1800 12000 12000

     

     

    EQUIPMENT FOR COLD-HEADING (PRODUCTION) OF HOLLOW PRODUCTS IN A SEMI-PROTECTIVE CASING

    Equipment Specification

    EQUIPMENT FOR COLD-HEADING (PRODUCTION) OF HOLLOW PRODUCTS IN A SEMI-PROTECTIVE CASING

      Model RG-3Н  
    FA-3Н Max. blank diameter 1-3 mm
    Max.blank length 18 mm
    The stroke length of the slide 38 mm
    Performance 100-120 pcs./min.
    The diameter of the core matrix 20 mm
    The diameter of the cutting matrix 13.5 mm
    Punch of the 1st position 18 mm
    Punch of the 2-position
    18 mm
    Power of main engine
    1 hp
    Oil pump
    ¼ hp
    Overall dimensions, LхWхH
    1370x840x1020 сm
    Net weight
    500 kg
    Gross Weight

    560 kg

    Equipment for the production of self-tappers and bolts
    Other models

    FA-5.5Н FA-15Н FA-20Н
    RG-5.5Н RG-15Н RG-20Н

     

    Equipment for the production of self-tappers and bolts
    SPECIFICATIONS

    Model Max.blank diameter Max.blank length The stroke length of the slide Performance,
    pcs./min.
    Diameter of the core matrix Diameter of the parting matrix The first punch The second punch Drive power Oil pump Options
    LxWxH, mm
    Net weight, kg Gross weight, kg
    RG-3Н 1-3 mm 18 mm 38 mm 100~120 20 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1370x840x1020 500 560
    RG-5.5Н 2-3.5 mm 30 mm 46 mm 100~120 25 mm 13.5 mm 18 mm 18 mm 1 LS ¼ LS 1750x1100x1600 780 860
    RG-15Н 3-6 mm 64 mm 92 mm 70~100 34.5 mm 19 mm 24 mm 24 mm 2 LS ¼ LS 2100x1100x1320 1640 1750
    RG-20Н 4-6 mm 76 mm 124 mm 90~110 45 mm 25 mm 36 mm 36 mm 3 LS ¼ LS 2400x1400x1500 2400 2500

     

     

    EQUIPMENT FOR DRILLS FORMATION ON SELF-TAPPERS

    EQUIPMENT FOR DRILLS FORMATION ON SELF-TAPPERS Equipment for drills formation on self-tappers

    Equipment for drills formation on self-tappers and bolts
    Equipment peculiarities:

    • The equipment produces self-tappers and forms drills.
    • Specification: high speed, stability and durability.
    • Material: equipment manufactures self-tappers of stainless steel SUS304, carbon steel SAE1018.
    • Components: the machine can be equipped with a rack for feeding blanks. This saves space and improve operation efficiency. Rack can be combined together with the cold heading and thjred-rolling equipment for the production and the formation of the self-tappers pens.
    • Set of tools.

     

    Equipment for drills formation on self-tappers and bolts
    SPECIFICATIONS

    Model RG14-125AN RG14-127AN RG14-203AN
    RG14-125AN-2S RG14-125AN-2S RG14-203AN-2S
    The main motor 7.5 l.s.x 6 phases 7.5 l.s.x 6 phases 7.5 l.s.x 6 phases
    INVERTER 5.5 kW 11 kW 11 kW
    Stress 220 V /380V x3 phases 220 V /380V x3 phases  220 V /380V x3 phases
    Principle of operation Pneumatic Pneumatic Pneumatic
    The controller NC DC24 V  NC DC24 V  NC DC24 V 
    Automatic systems Automatic fault logging system Automatic fault logging system Automatic fault logging system
    Vibrating feeder Ø620 mm Ø720 mm Ø850 mm
    Performance 120~520 pcs/min.  80~520 pcs/min.  80~520 pcs/min.
    Working diameter of wire #6(Ø2.8)~#14(Ø5.45), NO.1~NO.3 #6(Ø2.8)~#14(Ø5.45), NO.1~NO.5 #6(Ø2.8)~#14(Ø5.45), NO.1~NO.5
    Working length    9.5~127 mm (3/8”~5”)  9.5~127 mm (3/8”~5”) 16~203 mm (3/4”~8”)
    Specification Tool MA、MB  MB、MC  MB、MC 
    The size of the equipment in the package 1990х1610х1790 mm 2420х1820х1910 mm 2420х1820х1910 mm
    The net weight of the equipment 1944 kg 2206 kg (2S +2 kg) 2354 kg (2S +2 kg)
    Weight 2250 kg 2556 kg (2S +2 kg) 2704 kg (2S +2 kg)

     

    LACCESSORY FOR EQUIPMENT

    Stand for material supply to the machine

    Stand for material supply to the machine > Stand for material supply to the machine

     

    Home